Changing the water inlet valve on an Electrolux washing machine is a simple repair that can be done in a few steps. Before beginning, make sure to unplug the washing machine from the wall and turn off the water supply to the machine. You will need a Phillips screwdriver and a pair of pliers to complete the repair. First, locate the two screws that hold the valve in place. Remove the screws and then use the pliers to carefully remove the valve from the machine. Next, replace the old valve with the new one and secure it with the two screws. Finally, turn the water back on and plug the machine back in. Your Electrolux washing machine is now ready to use with the new water inlet valve.
How To Change Water Inlet Valve On Electrolux Washing Machine
Changing the water inlet valve on an Electrolux washing machine is a simple process that can be done in a few steps. First, unplug the machine and turn off the water supply. Then, remove the back panel of the machine and locate the water inlet valve. Next, disconnect the hoses from the valve and remove the screws that hold it in place. After that, install the new water inlet valve and reconnect the hoses. Finally, replace the back panel and turn on the water supply. Once the water inlet valve is changed, the Electrolux washing machine is ready to use.
How To Change Water Inlet Valve On Electrolux Washing Machine
1. Unplug the washing machine from the power source.
2. Turn off the water supply to the washing machine.
3. Disconnect the water supply hoses from the inlet valves.
4. Remove the screws that hold the inlet valve in place.
5. Remove the old inlet valve and replace it with the new one.
6. Reconnect the water supply hoses to the new inlet valve.
7. Secure the new inlet valve in place with the screws.
8. Turn on the water supply to the washing machine.
9. Plug the washing machine back into the power source.
In conclusion, changing the water inlet valve on an Electrolux washing machine is a relatively simple task that can be completed in a few steps. First, shut off the water supply to the washing machine. Next, remove the hoses from the water inlet valve and unscrew the mounting screws. Finally, install the new water inlet valve and reconnect the hoses. With the right tools and a bit of patience, anyone can easily replace the water inlet valve on an Electrolux washing machine.