How To Remove Drum From Electrolux Dryer

Removing the drum from an Electrolux dryer is a fairly straightforward process that requires a few basic tools. Before beginning, make sure that the dryer is unplugged and that you have access to a Phillips head screwdriver and a pair of pliers. Once you have these items, you can begin the process of removing the drum from the dryer.

First, locate the two screws on the back of the dryer that secure the top panel to the frame. Remove these screws and then lift the top panel off the frame. Next, locate the two screws on the inside of the dryer that secure the drum to the frame. Remove these screws and then carefully lift the drum out of the dryer. Once the drum is removed, you can access the belt and other components that may need to be serviced or replaced.

Suggested: How To Turn Off Sensor Dry On Electrolux Dryer

Removing the drum from an Electrolux dryer is a relatively simple process that should take no more than 30 minutes to complete. First, unplug the dryer from the wall outlet and remove the lint filter and the top panel. Next, disconnect the wires that are connected to the motor and the door switch. Then, remove the screws that are holding the front panel in place and slide the panel off. Finally, remove the screws that are holding the drum in place and slide the drum out. Once the drum is out, you can access the interior of the dryer to perform any necessary repairs.

Popular: How To Open Electrolux Dryer Door

How To Remove Drum From Electrolux Dryer

1. Unplug the dryer from the wall outlet and shut off the gas supply if you have a gas dryer.

2. Remove the lint filter and the screws that secure the top panel to the dryer.

3. Lift the top panel off and set it aside.

4. Remove the screws that secure the front panel to the dryer.

5. Pull the front panel off and set it aside.

6. Disconnect the wires that are connected to the drum.

7. Remove the screws that secure the drum to the dryer.

8. Lift the drum out of the dryer and set it aside.

In conclusion, removing the drum from an Electrolux dryer is a relatively simple process. First, you need to disconnect the power to the dryer and remove the back panel. Then, you need to remove the lint filter and the screws that hold the drum in place. Finally, you can lift the drum out of the dryer. With the right tools and a bit of patience, you can easily remove the drum from your Electrolux dryer.