If your Electrolux washer is not working properly, it may be due to a bad suspension rod. Suspension rods are responsible for keeping the washer balanced and stable during operation. To determine which suspension rod is bad, you will need to inspect each rod and look for signs of wear and tear. Check the rods for any bent, cracked, or loose parts. If you find any of these signs, then the rod needs to be replaced. You may also need to check the washer’s shock absorbers, as they can also cause the washer to be unbalanced. Once you have identified the bad suspension rod, you can replace it with a new one and your washer should be back to working properly.
How To Tell Which Suspension Rod Is Bad On My Electrolux Washer
In order to determine which suspension rod is bad on an Electrolux washer, you will need to check the four suspension rods located on the back of the washer. Look for any signs of wear or damage on the rods, such as cracks, dents, or rust. If any of the rods appear to be damaged, they should be replaced. Additionally, you should check the springs and clips that connect the rods to the washer. If any of these components are damaged, they should also be replaced. Finally, you should check the shock absorbers, which are located on the bottom of the washer, for any signs of wear or damage. If any of these components are damaged, they should be replaced as well.
How To Tell Which Suspension Rod Is Bad On My Electrolux Washer
1. Unplug the washer from the wall outlet and turn off the water supply.
2. Remove the back panel of the washer to access the suspension rods.
3. Inspect the suspension rods for any signs of wear or damage. Look for cracks, dents, or rust.
4. Test the suspension rods by gently pushing down on them with your hand. If they move too easily or feel loose, they may be worn or damaged.
5. If you find a damaged or worn suspension rod, replace it with a new one.
6. Reassemble the washer and plug it back in.
In conclusion, the best way to tell which suspension rod is bad on an Electrolux washer is to check for signs of wear and tear, such as cracks, bends, or rust. If any of these signs are present, it is likely that the suspension rod is bad and needs to be replaced. Additionally, if the washer is not spinning properly or is making strange noises, it is possible that the suspension rod is bad and needs to be replaced.