How To Tell Which Suspension Rod Is Bad On My Bosch Washer – Answer

If your Bosch washer is not performing properly, it may be due to a faulty suspension rod. To determine which suspension rod is bad, you will need to inspect the rods and look for signs of wear and tear. Check for any visible signs of rust, corrosion, or damage. Additionally, look for any signs of looseness or instability in the rods. If any of the suspension rods appear to be damaged or worn, it is likely that they are the cause of the issue. Once you have identified the bad suspension rod, you can replace it and get your washer back to working order.

How To Tell Which Suspension Rod Is Bad On My Bosch Washer

To tell which suspension rod is bad on a Bosch washer, start by unplugging the washer and tilting it back to access the bottom of the washer. Look for the suspension rods, which are located on the bottom of the washer and connect the tub to the frame. Check each rod for signs of wear and tear such as rust, cracks, or bends. If a rod is damaged, it should be replaced. If all of the suspension rods appear to be in good condition, the problem may lie elsewhere.

How To Tell Which Suspension Rod Is Bad On My Bosch Washer

1. Unplug the washer from the wall outlet and shut off the water supply.

2. Remove the access panel on the back of the washer to expose the suspension rods.

3. Inspect the suspension rods for any signs of wear or damage, such as cracks, bends, or broken ends.

4. Check the tension of the suspension rods by gently pulling on them. If one of the rods feels loose or has more give than the others, it is likely the bad rod.

5. Replace the bad suspension rod with a new one.

6. Reattach the access panel and plug the washer back in.

After inspecting the suspension rods on your Bosch washer, you can determine which one is bad by looking for signs of damage or wear. If the rod is bent, cracked, or has any other visible signs of damage, then it is likely the cause of the problem. Additionally, if the rod has any loose or missing parts, it should be replaced. With a little bit of inspection, you can easily tell which suspension rod is bad on your Bosch washer.