Taking the handles off your Maytag refrigerator is a relatively easy task. All you need is a Phillips head screwdriver and a few minutes of your time. Before you begin, make sure the refrigerator is unplugged and all food items have been removed. Once you have done this, you can begin the process of removing the handles.
First, locate the screws that are holding the handles in place. These screws are usually located at the top and bottom of the handles. Using your screwdriver, unscrew the screws and remove them. Once the screws have been removed, you can gently pull the handles off the refrigerator.
If the handles are stuck, you may need to use a small amount of lubricant or WD-40 to help loosen them. Once the handles have been removed, you can clean them with a soft cloth and warm, soapy water. Then, you can reinstall the handles by reversing the steps you took to remove them.
How To Take Hadles Off Maytag Refrigerator
Taking the handles off a Maytag refrigerator is a simple process that requires a few basic tools. First, unplug the refrigerator from the wall outlet and remove any food items from the refrigerator. Next, use a Phillips head screwdriver to remove the screws that are holding the handles in place. Once the screws are removed, the handles can be gently pulled away from the refrigerator. Depending on the model, the handles may have plastic caps that need to be removed before the handles can be taken off. Once the handles are off, the refrigerator can be wiped down and the handles can be cleaned and stored until they are needed again.
How To Take Hadles Off Maytag Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Remove the top hinge cover by unscrewing the screws that hold it in place.
3. Unscrew the screws that hold the handle to the door and remove the handle.
4. Unscrew the screws that hold the bottom hinge cover in place and remove it.
5. Unscrew the screws that hold the door to the refrigerator and remove the door.
6. Unscrew the screws that hold the handle to the door and remove the handle.
7. Reinstall the door and the handle.
8. Reinstall the top and bottom hinge covers.
9. Plug the refrigerator back into the wall outlet.
Taking the handles off of a Maytag refrigerator is a relatively simple process that can be done in a matter of minutes. First, you will need to locate the screws that are holding the handles in place. Once you have located the screws, use a screwdriver to loosen and remove them. After the screws are removed, you can simply lift the handles off of the refrigerator. Make sure to keep the screws in a safe place in case you need to reattach the handles at a later date.