If you need to access the evaporator coil on a Kenmore refrigerator, the process is relatively straightforward. First, you will need to locate the evaporator coil. On most Kenmore models, it is located behind the back panel in the freezer compartment. To access the evaporator coil, you will need to remove the back panel. This can be done by unscrewing the screws that hold the panel in place. Once the panel is removed, you should be able to see the evaporator coil. You can then remove the screws that hold the evaporator coil in place. Once the screws are removed, you can carefully pull out the evaporator coil for inspection or repair.
How To Get To The Evaporator Coil On A Kenmore Refrigerator
To access the evaporator coil on a Kenmore refrigerator, first unplug the refrigerator and remove the back panel. Once the back panel is removed, locate the evaporator coil, which is typically located near the top of the refrigerator. Carefully remove the evaporator coil cover, which is held in place with several screws. Once the cover is removed, the evaporator coil should be visible. Use a vacuum cleaner to remove any dust or debris from the coil before replacing the cover and back panel.
How To Get To The Evaporator Coil On A Kenmore Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Remove the screws that secure the back panel of the refrigerator.
3. Pull the back panel away from the refrigerator and set it aside.
4. Locate the evaporator coil, which is a metal box with a fan attached to it.
5. Unscrew the screws that secure the evaporator coil to the back panel.
6. Carefully lift the evaporator coil out of the refrigerator.
7. Disconnect the wires that connect the evaporator coil to the refrigerator.
8. Set the evaporator coil aside.
In conclusion, getting to the evaporator coil on a Kenmore refrigerator is relatively simple. All that is required is to remove the back panel, unscrew the evaporator cover, and then remove the evaporator coil. Once the evaporator coil is removed, it can be cleaned or replaced as needed. With the right tools and a little bit of patience, anyone can get to the evaporator coil on a Kenmore refrigerator.