Removing the light shield from a Kenmore refrigerator is a relatively easy process. The light shield is a protective cover that prevents the light bulbs from getting damaged. In order to remove the light shield, you will need a few basic tools. This guide will walk you through the steps of removing the light shield from your Kenmore refrigerator.
First, you will need to locate the screws that hold the light shield in place. The screws are usually located near the bottom of the refrigerator. Once you have located the screws, use a screwdriver to remove them.
Next, you will need to carefully pull the light shield away from the refrigerator. Be sure to hold the light shield firmly as you do this, as it may be a bit difficult to pull away. Once the light shield is removed, you can discard it or set it aside for future use. Finally, you will need to replace the screws that you removed earlier.
Favorite: How Many Watts Does A Kenmore Refrigerator Use
How To Remove Light Shield In Kenmore Refrigerator
Removing the light shield in a Kenmore refrigerator is a relatively simple process. First, locate the light shield on the ceiling of the refrigerator. It may be held in place by a few screws. Unscrew the screws and carefully remove the light shield. Once the light shield is removed, the light bulb should be exposed. Unscrew the bulb and replace it with a new one. Reattach the light shield and screw it back into place. Finally, turn the power back on and test the light to make sure it is working properly.
Recommended: How To Reset Filter On Kenmore Refrigerator
How To Remove Light Shield In Kenmore Refrigerator
1. Unplug the refrigerator and move it away from the wall.
2. Remove the screws that hold the light shield in place.
3. Gently pull the light shield away from the refrigerator.
4. Disconnect the wiring harness from the light shield.
5. Discard the light shield.
6. Reattach the wiring harness to the new light shield.
7. Place the new light shield in the refrigerator and secure it with the screws.
8. Plug the refrigerator back in and move it back against the wall.
Suggested: How Do I Turn Off The Filter Light On My Kenmore Refrigerator
Removing the light shield in a Kenmore refrigerator is a relatively simple process that requires minimal tools and effort. First, unplug the refrigerator and remove the screws that hold the shield in place. Then, carefully remove the shield and set it aside. Finally, replace the screws and plug the refrigerator back in. With these steps, you can easily remove the light shield in a Kenmore refrigerator.