If you’re having trouble with your Whirlpool dishwasher, you may need to put it into diagnostic mode to help troubleshoot the problem. Diagnostic mode allows you to check the operation of the dishwasher’s components and can help you identify the cause of the issue. Here is a step-by-step guide on how to put your Whirlpool dishwasher into diagnostic mode:
1. With the dishwasher off, press and hold the “Heated Dry” and “Normal” buttons simultaneously.
2. While continuing to hold the buttons, press the “Power” button.
3. Release all the buttons and the dishwasher will enter diagnostic mode.
4. The lights on the dishwasher will flash in a specific pattern. This pattern will indicate the current status of the dishwasher.
How To Put Whirlpool Dishwasher In Diagnostic Mode
To put a Whirlpool dishwasher into diagnostic mode, start by pressing the “Normal Wash” and “Heated Dry” buttons simultaneously for 3 seconds. Once the lights on the control panel start flashing, press the “Normal Wash” button again. The dishwasher should now be in diagnostic mode and the lights will continue to flash. To exit diagnostic mode, press the “Normal Wash” and “Heated Dry” buttons simultaneously for 3 seconds. This will reset the dishwasher and it will be ready to use again.
How To Put Whirlpool Dishwasher In Diagnostic Mode
1. Unplug the dishwasher from the power source.
2. Press and hold the heated dry and normal buttons, then plug the unit back in.
3. Release the buttons and the display should show “F1”.
4. Press the heated dry button to cycle through the diagnostic codes.
5. When the appropriate code appears, press the normal button to enter the diagnostic mode.
6. Use the heated dry and normal buttons to navigate the menu and make adjustments.
7. To exit the diagnostic mode, press and hold the heated dry and normal buttons until the display shows “F1” again.
Putting your Whirlpool dishwasher in diagnostic mode is a simple process that can help you troubleshoot any issue that may arise with your appliance. By pressing the heated dry and normal buttons simultaneously for three seconds, you can enter diagnostic mode and begin the process of testing the various components of your dishwasher. This can help you identify any potential problems and take the necessary steps to repair them. With the right knowledge and tools, you can easily diagnose and fix any issues with your Whirlpool dishwasher.