If your Samsung washing machine is not draining properly, it can be a frustrating experience. Fortunately, there are a few steps you can take to help resolve the issue. Here’s how to drain a Samsung washing machine:
1. Unplug the washing machine from the power source.
2. Place a container or bucket beneath the drain hose.
3. Disconnect the drain hose from the back of the washing machine.
4. Place the end of the drain hose into the container or bucket.
5. Turn the knob on the back of the washing machine counterclockwise to open the drain valve.
6. Allow the water to drain from the washing machine and into the container or bucket.
7. Once the water has drained, turn the knob on the back of the washing machine clockwise to close the drain valve.
8. Reconnect the drain hose to the back of the washing machine.
How To Drain Samsung Washing Machine
This article provides step-by-step instructions on how to drain a Samsung washing machine. First, unplug the washing machine from the wall outlet. Next, locate the drain hose which is usually located on the back of the machine. Place a bucket or a bowl underneath the hose to catch the water. Disconnect the drain hose from the machine and allow the water to drain into the bucket or bowl. Once the water has finished draining, reconnect the drain hose and plug the machine back into the wall outlet. Finally, run a rinse cycle to ensure that all the water has been drained from the machine. Following these steps will ensure that the washing machine is properly drained and ready for use.
How To Drain Samsung Washing Machine
1. Unplug the washing machine from the power source.
2. Locate the drain hose at the back of the machine.
3. Place a bucket or container under the drain hose to catch the water.
4. Unscrew the drain hose from the back of the machine.
5. Allow the water to drain completely from the machine.
6. Once the water has drained, reattach the drain hose to the back of the machine.
7. Plug the washing machine back into the power source.
Draining a Samsung washing machine is a simple process that can be done in a few steps. To begin, unplug the washing machine from the power source. Then, locate the drain hose and disconnect it from the back of the machine. Place the end of the hose in a sink or bucket and turn the knob on the side of the machine to the drain setting. After the water has drained, reconnect the hose and turn the knob back to the off position. Finally, plug the machine back in and you are done.