Removing the water inlet screen on a Samsung washing machine is a relatively simple process that requires basic tools and a few minutes of your time. The water inlet screen is located on the back of the washing machine and is designed to keep debris and other particles from entering the washing machine and clogging the water lines. In order to properly remove the water inlet screen, you will need a flathead screwdriver, a pair of needle-nose pliers, and a bucket or bowl to catch any water that may spill out.
How To Remove Water Inlet Screen On Samsung Washing Machine
Removing the water inlet screen on a Samsung washing machine is a simple process that requires a few basic tools. First, unplug the machine from the power source and turn off the water supply. Then, remove the two screws holding the water inlet valve in place. Next, pull the valve away from the machine and locate the water inlet screen. Finally, use a pair of pliers to gently remove the screen and clean it with a soft brush. Reinstall the screen and the valve, and reconnect the power and water supply to the machine.
How To Remove Water Inlet Screen On Samsung Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Turn off the water supply to the washing machine.
3. Locate the water inlet screen on the back of the washing machine near the water hose connections.
4. Use a pair of needle-nose pliers to remove the water inlet screen.
5. Clean the water inlet screen with a soft brush.
6. Reinstall the water inlet screen and tighten with the pliers.
7. Turn on the water supply to the washing machine.
8. Plug the washing machine back into the wall outlet.
In conclusion, removing the water inlet screen on a Samsung washing machine is a relatively simple task that can be accomplished with a few basic tools. First, unplug the machine and shut off the water supply. Then, remove the screws that hold the water inlet valve in place. Finally, carefully remove the water inlet screen and clean it with a soft cloth or brush. Once the screen is clean, reassemble the parts and turn the water supply back on. Following these steps should help you remove the water inlet screen on your Samsung washing machine with ease.