How To Take The Timer Off A Lg Washer Machine

Taking the timer off a LG washer machine is a relatively simple task that can be completed in a few steps. Before beginning, make sure the washer is unplugged and the power is off. You will need a Phillips head screwdriver and a flathead screwdriver. First, remove the screws on the back panel of the washer. Once the screws are removed, you can carefully lift the back panel off the washer. Next, locate the timer and remove the screws that are holding it in place. Carefully pull the timer out of the washer and disconnect the wires from the back of the timer. Once the timer is removed, you can replace it with a new one or simply leave the washer without a timer. Finally, replace the back panel and secure it with the screws that were removed earlier.

How To Take The Timer Off A Lg Washer Machine

To take the timer off a LG washer machine, first unplug the machine from the wall outlet. Then, remove the top panel of the washer by unscrewing the screws that hold it in place. Once the top panel is removed, locate the timer knob and pull it off. This will expose the timer shaft, which can then be unscrewed with a screwdriver. Finally, the timer can be removed from the washer.

How To Take The Timer Off A Lg Washer Machine

1. Unplug the washer machine from the wall outlet.

2. Locate the timer knob on the front of the washer machine.

3. Turn the timer knob counterclockwise until it comes off the washer machine.

4. Remove the timer knob from the washer machine.

5. Remove the two screws that hold the timer in place.

6. Pull the timer out of the washer machine.

7. Disconnect the wires from the timer and set the timer aside.

8. Reassemble the washer machine and plug it back into the wall outlet.

To take the timer off a LG washer machine, first unplug the washer from the wall outlet and remove the control panel cover. Then, locate the timer knob and remove the two screws that secure it to the control panel. Finally, carefully remove the timer knob and disconnect the wiring harness from the back of the timer. Once the timer is removed, the washer should be ready for use.