Changing the water inlet valve on a GE washing machine is a relatively simple process. The water inlet valve is located at the back of the washing machine and is responsible for controlling the flow of water into the machine. It is important to ensure that the water inlet valve is in good working order in order to ensure that the washing machine is operating efficiently. In this guide, we will walk you through the steps necessary to replace the water inlet valve on a GE washing machine.
How To Change Water Inlet Valve On Ge Washing Machine
Changing the water inlet valve on a GE washing machine is a relatively simple process that can be done in a few steps. First, unplug the power cord from the wall outlet and turn off the water supply. Then, remove the back panel of the washing machine to access the water inlet valve. Disconnect the hoses from the water inlet valve, then unscrew the mounting screws and remove the valve. Install the new water inlet valve and reconnect the hoses. Finally, reattach the back panel and plug the power cord back into the wall outlet.
How To Change Water Inlet Valve On Ge Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Turn off the water supply to the washing machine.
3. Disconnect the water supply hoses from the inlet valve.
4. Remove the screws that secure the inlet valve to the back of the washer.
5. Pull the inlet valve out from the back of the washer.
6. Install the new inlet valve in the same position as the old one.
7. Secure the new inlet valve with the screws.
8. Reconnect the water supply hoses to the inlet valve.
9. Turn on the water supply to the washing machine.
10. Plug the washing machine back into the wall outlet.
In conclusion, changing the water inlet valve on a GE washing machine is a relatively simple job. All you need is a few basic tools and a replacement valve. First, turn off the water supply to the washing machine. Then, disconnect the water hoses from the inlet valve. Once the hoses are disconnected, remove the screws that hold the valve in place and remove the old valve. Install the new valve by reversing the steps. Finally, turn the water supply back on and test the new valve. With a little bit of patience and a few simple steps, you can easily change the water inlet valve on your GE washing machine.