If your Whirlpool refrigerator compressor is not working correctly, you may need to reset it. Resetting the compressor can help restore the refrigerator to its normal operation. This guide will walk you through the steps of resetting a Whirlpool refrigerator compressor.
Before you begin, make sure the refrigerator is unplugged from the power source. Once the refrigerator is unplugged, locate the compressor. It is usually located at the bottom of the refrigerator, behind the kick plate.
Once you have located the compressor, remove the access panel. This will allow you to access the compressor’s reset switch. Carefully press the reset switch and wait for the compressor to start. If the compressor does not start, you may need to replace it.
Once the compressor has started, replace the access panel and plug the refrigerator back in. Allow the refrigerator to run for at least 15 minutes before turning it off and unplugging it again.
How To Reset A Whirlpool Refrigerator Compressor
1. Unplug the refrigerator from the power outlet.
2. Remove the back panel of the refrigerator to access the compressor.
3. Locate the reset button on the compressor and press it.
4. Wait for the compressor to reset itself.
5. Plug the refrigerator back into the power outlet.
6. Allow the refrigerator to cool down and check if it is working properly.
In conclusion, resetting a Whirlpool refrigerator compressor is a relatively simple process that can be done in just a few steps. First, unplug the refrigerator from the wall outlet. Then, locate the reset button on the compressor and press it for five seconds. Finally, plug the refrigerator back in and allow the compressor to reset. Following these steps should reset the compressor and get your refrigerator running again.