The LD code on a Whirlpool Cabrio washer indicates a long drain error. This code appears when the washer is unable to drain the water from the tub in a certain amount of time. The most common causes of this code are a clogged drain hose or pump, a faulty drain pump, or a restricted drain hose. If the LD code appears on your washer, you should check for any blockages or restrictions in the drain hose, and if necessary, replace the drain pump.
What Does Ld Mean On A Whirlpool Cabrio Washer
LD stands for “long drain” and is an error code that is displayed on Whirlpool Cabrio washers when the drain cycle takes too long to complete.
What Does Ld Mean On A Whirlpool Cabrio Washer
1. Locate the control panel on the washer.
2. Look for the “LD” button or indicator light.
3. Press the “LD” button or indicator light to initiate a “Long Drain” cycle.
4. The washer will then begin to fill with water and will then drain the water to ensure that all of the detergent and dirt is removed from the washer.
5. Once the “Long Drain” cycle is complete, the washer will beep to indicate that the cycle is complete.
In conclusion, LD on a Whirlpool Cabrio washer stands for “Load Detected”, which is a diagnostic code that indicates that the washer has detected a load inside the drum. This code is typically displayed when the washer is in the wash cycle and the lid has been opened. It is important to close the lid before the washer can continue with the cycle.