If you’re getting an F5 E3 error code on your Whirlpool washer, it means that the washer is not draining properly. This error code can be caused by a few different things, but thankfully it’s usually an easy fix. In this guide, we’ll walk you through the steps to diagnose and repair the F5 E3 error code on your Whirlpool washer.
Suggested: How To Drain A Whirlpool Duet Washer
How To Fix F5 E3 Error Code Whirlpool Washer
The F5E3 error code on a Whirlpool washer usually indicates a problem with the water level pressure switch. To fix this issue, you should first unplug the washer and then locate the water level pressure switch. Once you have located the switch, you should check the wiring and connections to make sure everything is secure. If the wiring and connections are secure, then you should replace the water level pressure switch. If the issue persists after replacing the switch, then you may need to contact a professional for further assistance.
Favorite: How To Access Drain Pump On Whirlpool Duet Washer
How To Fix F5 E3 Error Code Whirlpool Washer
1. Unplug the washer from the power source.
2. Check the drain hose for any blockages.
3. Clean out the drain pump filter.
4. Check the drain hose for any kinks or bends.
5. Check the drain pump for any obstructions.
6. Check the pressure switch for any debris.
7. Check the water inlet valve for any debris.
8. Check the water level switch for any debris.
9. Check the wiring connections for any loose connections.
10. Plug the washer back in and run a test cycle to see if the error code is still present.
The best way to fix an F5 E3 error code on a Whirlpool washer is to check the drain hose for any blockages or kinks, and to ensure that the drain hose is correctly connected to the drain pipe. If the drain hose is clear, then the problem may be with the drain pump, and this should be checked and replaced if necessary. If the problem persists, then the control board should be checked for any problems. If all else fails, then it is best to contact a professional to diagnose and repair the issue.