Draining a whirlpool washer is a relatively simple process that can be done in a few steps. Before you begin, make sure that the power to the washer is turned off and the water supply is shut off. Once you have done this, you can begin draining the washer.
First, you will need to locate the drain hose. This is usually located at the back of the washer and is connected to the bottom of the washer. Once you have located the drain hose, you will need to disconnect it from the washer.
Next, you will need to place the end of the drain hose in a container that is large enough to hold the water that will be drained from the washer. Once the container is in place, you can turn the water back on and allow the washer to drain.
How To Drain A Whirlpool Washer
1. Unplug the washer from the wall outlet.
2. Turn off the water supply to the washer.
3. Disconnect the hoses from the washer.
4. Place a bucket or pan beneath the washer.
5. Locate the drain hose at the back of the washer.
6. Unscrew the hose clamp and remove the hose.
7. Allow the water to drain into the bucket or pan.
8. When the water has finished draining, replace the hose and clamp.
9. Reconnect the hoses to the washer and turn on the water supply.
10. Plug the washer back into the wall outlet.
How To Drain A Whirlpool Washer
Draining a whirlpool washer is a fairly simple process that can be done in a few steps. First, unplug the washer and shut off the water supply. Then, disconnect the drain hose from the back of the washer and place it in a bucket or sink. Finally, turn the washer on the spin cycle and drain the water out of the hose. Once the cycle is finished, turn off the washer and disconnect the hose. This should complete the draining process for your whirlpool washer.