Replacing the agitator dogs on a Whirlpool washing machine is a fairly simple task that can be completed in just a few minutes. The agitator dogs are the four plastic pieces that are located inside the agitator. These pieces help to move the agitator back and forth during the wash cycle. Over time, these pieces can wear out and need to be replaced. In this guide, we will walk you through the steps to replace the agitator dogs on a Whirlpool washing machine.
How To Replace Agitator Dogs On Whirlpool Washing Machine
1. Unplug the washing machine from the wall and shut off the water supply.
2. Remove the agitator cap by pulling it straight up.
3. Remove the agitator bolt with a socket wrench.
4. Lift the agitator out of the washing machine.
5. Remove the old agitator dogs from the agitator.
6. Insert the new agitator dogs into the slots on the agitator.
7. Place the agitator back into the washing machine and secure it with the agitator bolt.
8. Replace the agitator cap and plug the washing machine back into the wall.
9. Turn on the water supply and test the washing machine to make sure the agitator dogs are working properly.
Replacing the agitator dogs on a Whirlpool washing machine is a relatively easy task that can be completed in a few simple steps. First, the agitator must be removed from the machine, and then the agitator dogs can be unscrewed and replaced with new ones. Once the agitator dogs are replaced, the agitator can be reattached and the machine can be tested to make sure it is working properly. With the right tools and a little patience, replacing the agitator dogs on a Whirlpool washing machine is a relatively simple task that can be completed in a short amount of time.