If your Whirlpool washing machine is not draining properly, it’s important to take the necessary steps to get it draining again. This guide will walk you through the process of draining water from your Whirlpool washing machine. First, you’ll need to unplug the machine from the wall outlet and turn off the water supply. Then, you’ll need to remove the drain hose from the back of the washer and place it in a bucket. Next, you’ll need to locate the drain filter and remove it. Once the filter is removed, you’ll be able to use a wet/dry vacuum to suck out any remaining water in the washing machine. Finally, you’ll need to reassemble the drain filter and reconnect the drain hose. After that, your Whirlpool washing machine should be draining properly.
How To Drain Water From Whirlpool Washing Machine
1. Unplug the washing machine from the power source.
2. Turn off the water supply valves to the washing machine.
3. Place a bucket or large bowl under the drain hose.
4. Disconnect the drain hose from the back of the washer and place the end of the hose into the bucket or bowl.
5. Turn the knob on the water pump to the “Drain” position.
6. Allow the water to drain from the machine.
7. Once the water has finished draining, turn the knob on the water pump back to the “Off” position.
8. Reconnect the drain hose to the back of the washer.
9. Turn on the water supply valves to the washing machine.
10. Plug the washing machine back into the power source.
The best way to drain water from a Whirlpool washing machine is to turn off the power to the machine, unplug it from the wall, and then tilt the machine forward so that the water can drain out of the bottom. If the water does not drain out, you can use a wet/dry vacuum to suck out the water. It is important to remember to turn off the power before attempting to drain the water, as this can prevent any electrical damage.