Changing the idler pulley on a Whirlpool Cabrio dryer is a relatively straightforward process. You will need a few common tools, such as a Phillips screwdriver, a flat-head screwdriver, and a pair of pliers. Before you begin, make sure to unplug the dryer from the wall outlet. Then, you can begin the process of replacing the idler pulley.
First, remove the screws that hold the back panel in place. Once the back panel is removed, you will be able to access the idler pulley. Use the pliers to loosen the tension on the belt and then remove the belt from the pulley. Next, remove the screws that hold the pulley in place and then carefully remove the pulley from the dryer.
Now, you can install the new idler pulley. Place the new pulley in the same position as the old one and secure it with the screws. Make
How To Change Idler Pulley On Whirlpool Cabrio Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the two screws that secure the lint filter cover to the top of the dryer.
3. Lift the lint filter cover off of the dryer.
4. Locate the idler pulley on the right side of the dryer.
5. Remove the belt from the idler pulley by sliding it off of the pulley.
6. Remove the mounting screw that secures the idler pulley to the dryer.
7. Pull the old idler pulley off of the dryer.
8. Install the new idler pulley onto the dryer.
9. Secure the new idler pulley with the mounting screw.
10. Slide the belt onto the new idler pulley.
11. Replace the lint filter cover and secure it with the two screws.
How To Change Idler Pulley On Whirlpool Cabrio Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the back panel of the dryer.
3. Locate the idler pulley and loosen the tensioner arm.
4. Remove the belt from the pulley and then remove the pulley from the dryer.
5. Install the new pulley and reattach the belt.
6. Reattach the tensioner arm and reattach the back panel.
7. Plug the dryer back in and test the dryer.
Changing the idler pulley on a Whirlpool Cabrio dryer is a relatively simple process. With the right tools, it can be done quickly and easily. First, disconnect the power to the dryer and remove the front panel. Then, remove the belt and idler pulley. Install the new idler pulley and reattach the belt. Finally, reattach the front panel and reconnect the power to the dryer. With these simple steps, you can easily replace the idler pulley on your Whirlpool Cabrio dryer.