Removing the agitator from a Frigidaire washing machine model FFTW4120SW1 is a relatively simple process that can be completed in just a few steps. Before beginning, make sure to unplug the washing machine from the wall outlet and turn off the water supply valves. Once the machine is disconnected from power and water, you can begin the process of removing the agitator. First, remove the fabric softener dispenser cup by pulling it straight up. Next, use a flathead screwdriver to remove the screws located on the bottom of the agitator. Once the screws are removed, you can lift the agitator straight up and out of the washing machine. Finally, you can replace the agitator with a new one and reassemble the washing machine.
How To Remove Agitator On Frigidaire Washing Machine Fftw4120Sw1
The Frigidaire FFTW4120SW1 washing machine has an agitator that can be removed to access the inner drum for cleaning and maintenance. To remove the agitator, first unplug the power cord from the wall outlet. Then, remove the fabric softener dispenser cap and lift off the agitator. Next, remove the agitator bolt, washer, and spacer. Finally, lift the agitator off the shaft and discard the old agitator. The new agitator can then be installed in the reverse order.
How To Remove Agitator On Frigidaire Washing Machine Fftw4120Sw1
1. Unplug the washing machine from the wall outlet.
2. Locate the agitator in the center of the washer’s tub.
3. Remove the fabric softener dispenser cup, if applicable.
4. Remove the agitator cap by pulling it straight up.
5. Unscrew the bolt located in the center of the agitator using a socket wrench.
6. Lift the agitator out of the washer.
7. Clean the agitator and the area around it.
8. Replace the agitator and bolt, using the socket wrench.
9. Replace the agitator cap.
10. Plug the washing machine back into the wall outlet.
The process for removing the agitator from a Frigidaire FFTW4120SW1 washing machine is fairly straightforward. First, unplug the machine from the wall outlet and shut off the water supply. Then, remove the fabric softener cup, the agitator cap, and the agitator itself. Finally, remove the agitator bolt with a socket wrench, and the agitator should come off easily. With these simple steps, you can easily remove the agitator from your Frigidaire FFTW4120SW1 washing machine.