Removing the water inlet screen on an Amana washing machine is a relatively simple process that can be completed in a few steps. The water inlet screen is located on the back of the washing machine and is used to filter out dirt and debris from the water supply. Before attempting to remove the water inlet screen, make sure to turn off the water supply and unplug the washing machine from the wall outlet. Once these steps have been completed, you can begin to remove the water inlet screen.
First, locate the two screws on the back of the washing machine that hold the water inlet screen in place. Using a Phillips head screwdriver, remove the screws and set them aside. Next, carefully pull the water inlet screen away from the back of the washing machine. You may need to use a pair of pliers to help loosen the screen if it is stuck.
How To Remove Water Inlet Screen On Amana Washing Machine
Removing the water inlet screen on an Amana washing machine is a simple process that can be completed in just a few steps. First, locate the water inlet valve on the back of the machine. Unscrew the hose clamp and remove the hoses from the valve. Then, use a flathead screwdriver to remove the screws that hold the water inlet screen in place. Finally, pull the screen out and clean it with a soft brush or cloth. Replace the screen, reattach the hoses, and tighten the hose clamp to complete the process.
How To Remove Water Inlet Screen On Amana Washing Machine
1. Unplug the washing machine from the power source.
2. Locate the water inlet screen on the back of the washing machine.
3. Use a flat-head screwdriver to remove the screws that hold the screen in place.
4. Carefully remove the screen and set aside.
5. Inspect the screen for any signs of damage or debris.
6. Clean the screen with a soft cloth and warm, soapy water.
7. Rinse the screen with clean water and dry thoroughly.
8. Reinstall the screen and secure it with the screws.
9. Plug the washing machine back into the power source.
Removing the water inlet screen on an Amana washing machine is a simple process. First, unplug the washing machine from the wall outlet and turn off the water supply. Then, use a flat-head screwdriver to remove the screws that hold the water inlet valve in place. Once the screws are removed, you can carefully pull the valve out and remove the water inlet screen. Be sure to inspect the screen for any blockages or debris and clean it thoroughly before replacing it. Finally, reassemble the valve and screws and turn the water supply back on.