Removing the drum from an Amana dryer is a relatively straightforward process. It requires a few basic tools and a bit of patience. The following steps will guide you through the process.
1. Unplug the dryer from the wall outlet.
2. Remove the lint filter cover and lint filter.
3. Remove the screws that secure the top of the dryer to the cabinet.
4. Lift the top of the dryer off the cabinet.
5. Disconnect the wires that connect the dryer to the power source.
6. Remove the screws that secure the front of the dryer to the cabinet.
7. Lift the front of the dryer off the cabinet.
8. Disconnect the drum drive belt from the motor.
9. Remove the screws that secure the drum to the cabinet.
10. Lift the drum out of the cabinet.
How To Remove Drum From Amana Dryer
Removing the drum from an Amana dryer is a relatively simple process. First, unplug the dryer from the wall and move it away from the wall. Next, remove the lint filter and the screws that secure the top panel. Lift the top panel off and remove the screws that secure the front panel. Pull the front panel off and remove the screws that secure the drum to the back panel. Pull the drum out of the dryer and set aside. Finally, disconnect the drum belt from the motor and drum pulley. With the drum removed, you can access the internal components of the dryer for cleaning or repair.
How To Remove Drum From Amana Dryer
1. Unplug the dryer from the wall outlet and turn off the gas supply if the dryer is gas-powered.
2. Remove the lint filter and the lint filter housing.
3. Remove the screws that hold the top panel in place.
4. Lift the top panel off the dryer and set it aside.
5. Remove the screws that hold the front panel in place.
6. Pull the front panel away from the dryer and set it aside.
7. Unplug the wires that connect the drum to the motor.
8. Disconnect the belt from the motor and the drum.
9. Remove the screws that hold the drum in place.
10. Pull the drum out of the dryer and set it aside.
Removing the drum from an Amana dryer is a relatively simple process and can be completed in a few steps. First, unplug the dryer from the wall outlet and remove the lint filter. Next, remove the screws on the back of the dryer to access the drum. Finally, lift the drum out of the dryer and disconnect the belt from the motor. With these steps, you can easily remove the drum from your Amana dryer.