Removing the agitator from a Frigidaire washing machine is a relatively simple process that can be completed in a few steps. Before attempting to remove the agitator, you should unplug the washing machine from the wall and turn off the water supply to the washing machine. Once these steps have been completed, you can begin to remove the agitator. First, you will need to locate the two clips that hold the agitator in place. These clips are usually located at the top and bottom of the agitator. Once the clips have been located, you can use a flathead screwdriver to pry them off. After the clips have been removed, you can then pull the agitator straight up and out of the washing machine. Once the agitator has been removed, you can then install the new agitator and reattach the clips.
How Do You Remove The Agitator From A Frigidaire Washing Machine
Removing the agitator from a Frigidaire washing machine is a relatively simple process. First, unplug the machine from the power source. Next, use a flathead screwdriver to remove the fabric softener cap from the top of the agitator. Then, remove the bolt from the center of the agitator and lift the agitator straight up. Finally, remove the agitator from the machine and replace it with a new one.
How Do You Remove The Agitator From A Frigidaire Washing Machine
1. Unplug the washing machine from the power source.
2. Locate the agitator and remove the fabric softener dispenser cup, if applicable.
3. Remove the bolt in the center of the agitator using a socket wrench.
4. Lift the agitator off the washing machine shaft.
5. Inspect the agitator for any signs of damage or wear.
6. Replace the agitator if necessary.
7. Reattach the fabric softener dispenser cup, if applicable.
8. Reinstall the bolt in the center of the agitator using a socket wrench.
9. Plug the washing machine back into the power source.
Removing the agitator from a Frigidaire washing machine is a relatively simple process that can be done in a few steps. First, unplug the machine and remove the fabric softener and bleach dispensers. Next, use a pair of pliers to remove the agitator cap and then unscrew the bolt underneath. Finally, lift the agitator up and out of the machine. With the right tools and a little bit of patience, you can easily remove the agitator from your Frigidaire washing machine.