Removing an agitator from a Hotpoint washing machine is a relatively simple process that can be done with a few basic tools. The first step is to unplug the machine from the wall outlet and shut off the water supply to the machine. Next, you will need to remove the top lid of the washing machine and locate the agitator. Once you have located the agitator, you will need to remove the bolt or nut that is holding it in place. Once the bolt or nut has been removed, you can then gently pull the agitator out of the machine. Finally, you can replace the agitator with a new one and reassemble the washing machine.
Suggested: How To Clean An Old Hotpoint Dishwasher
How To Remove An Agitator From A Hotpoint Washing Machine
Removing an agitator from a Hotpoint washing machine is a relatively simple process. First, unplug the washing machine from the wall outlet and turn off the water supply to the machine. Next, remove the top lid of the washer and locate the agitator. Depending on the model, the agitator may be held in place by a bolt or a nut. Use a wrench to loosen the bolt or nut and remove it. Once the bolt or nut is removed, the agitator should be able to be lifted out of the machine. If the agitator is stuck, use a flat-head screwdriver to gently pry it up. Once the agitator is removed, it can be replaced with a new one.
Favorite: How To Remove Hotpoint Dishwasher Filter
How To Remove An Agitator From A Hotpoint Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Turn off the water supply to the washing machine.
3. Remove the lid of the washing machine.
4. Locate the agitator and remove any screws or bolts that are holding it in place.
5. Carefully lift the agitator out of the washing machine.
6. Clean any debris from the agitator and the area where it was located.
7. Replace the lid and plug the washing machine back in to the wall outlet.
8. Turn the water supply back on.
Recommended: What Detergent Does Hotpoint Recommend For Washing Machine
Removing an agitator from a Hotpoint washing machine is a relatively simple process that can be completed in a few steps. First, disconnect the power to the washing machine and unplug it from the wall. Next, remove the fabric softener dispenser, if applicable, and unscrew the agitator from the top of the washer. Finally, lift the agitator off the washer and set aside. With these steps, you can easily remove an agitator from a Hotpoint washing machine.