Removing the filter from a Hotpoint dishwasher is an easy process that takes only a few minutes. The filter is located at the bottom of the dishwasher and is usually covered by a plate. To remove the filter, you will need to remove the plate, unscrew the filter, and then lift the filter out of the dishwasher. This guide will walk you through the steps of removing the filter from your Hotpoint dishwasher.
How To Remove Hotpoint Dishwasher Filter
Hotpoint dishwashers have an easily removable filter that can be accessed by opening the filter cover on the bottom of the dishwasher. To remove the filter, first make sure the dishwasher is unplugged and the water supply is turned off. Then, locate the filter cover on the bottom of the dishwasher and open it. Remove the filter and any debris that may have accumulated. Rinse the filter with warm water and a mild detergent before replacing it. Finally, close the filter cover and plug the dishwasher back in.
How To Remove Hotpoint Dishwasher Filter
1. Unplug the dishwasher from the power source.
2. Open the dishwasher door and locate the filter. It is usually located at the bottom of the dishwasher.
3. Remove any debris or food particles that may be blocking the filter.
4. Use a flat-head screwdriver to remove the screws that are holding the filter in place.
5. Carefully remove the filter and discard it.
6. Clean the filter area with a damp cloth.
7. Install a new filter in the same spot and secure it with the screws.
8. Plug the dishwasher back in and test it.
In conclusion, removing a Hotpoint dishwasher filter is a relatively simple process. All you need to do is locate the filter, unscrew it, and then remove it from the dishwasher. Once the filter is out, it can be cleaned and replaced. With a few simple steps, you can easily keep your Hotpoint dishwasher running smoothly.