If your Haier washing machine is not draining properly, it is important to take the necessary steps to resolve the issue. This guide will provide you with the information you need to properly drain your Haier washing machine. Before beginning, make sure to unplug the machine from the power source.
First, you will need to locate the drain hose. This is usually located at the back of the machine. Once you have located the drain hose, you will need to disconnect it from the washing machine. Next, you will need to place a bucket or other container underneath the drain hose. This is necessary in order to catch the water that will be draining from the machine. Once the bucket is in place, you can begin the draining process. To begin draining, locate the drain valve on the back of the machine. This is usually located near the drain hose. Once you have located the drain valve, turn it counterclockwise to open it.
How To Drain Haier Washing Machine
This article provides a step-by-step guide on how to drain a Haier washing machine. First, unplug the washing machine from the wall outlet and turn off the water supply. Then, remove the drain hose from the back of the machine and place it in a bucket or sink. Next, turn the dial to the “Drain” setting and press the start button. The washing machine will begin to drain out the water. Finally, when the water has finished draining, turn the dial back to the “Off” setting and replace the drain hose.
How To Drain Haier Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Turn off the water supply to the machine.
3. Place a bucket or other container beneath the drain hose.
4. Disconnect the drain hose from the back of the washing machine.
5. Place the end of the drain hose into the bucket.
6. Turn the knob on the back of the machine to the “Drain” setting.
7. Allow the water to drain completely from the machine.
8. Disconnect the drain hose from the bucket.
9. Reconnect the drain hose to the back of the washing machine.
10. Turn the knob on the back of the machine to the “Off” setting.
11. Plug the washing machine back into the wall outlet.
12. Turn on the water supply to the machine.
In conclusion, draining a Haier washing machine is a relatively simple process. All you need to do is locate the drain hose, ensure it is securely connected to the drain pipe, and then turn on the water tap. Once the water has drained, disconnect the hose from the drain pipe and turn off the water tap. Finally, you can use a wet/dry vacuum to remove any remaining water from the drum. Following these steps will ensure that your Haier washing machine is properly drained.