If you have a Bosch refrigerator that has an alarm, you may be looking for a way to disable it. Disabling the alarm is a relatively simple process, but it is important to understand the steps involved. This guide will provide you with instructions on how to disable the alarm on your Bosch refrigerator.
First, locate the alarm control panel on the side of the refrigerator. This panel should have a button labeled “Alarm”. Press and hold the “Alarm” button for three seconds. This will disable the alarm and the alarm indicator light should turn off.
If the alarm indicator light does not turn off, you may need to reset the refrigerator. To do this, unplug the refrigerator from the power source and wait for 30 seconds. Then, plug the refrigerator back in and press and hold the “Alarm” button for three seconds. This should reset the alarm and the indicator light should turn off.
How To Disable Alarm On Bosch Refrigerator
To disable the alarm on a Bosch refrigerator, first locate the alarm button, which is usually located on the control panel or near the top of the door. Press and hold the alarm button for 3 seconds until the alarm stops and the indicator light turns off. If the alarm does not stop, unplug the refrigerator and wait for 30 seconds before plugging it back in. Once the alarm is disabled, the refrigerator will continue to operate normally.
How To Disable Alarm On Bosch Refrigerator
1. Locate the alarm switch on the front of the refrigerator. This will usually be a small switch located near the top of the refrigerator door.
2. Slide the switch to the “off” position.
3. Press and hold the “Alarm Reset” button for 3 seconds. This will reset the alarm and turn it off.
4. Check the display to make sure the alarm has been disabled. If the alarm is still active, repeat steps 1-3.
In conclusion, disabling the alarm on a Bosch refrigerator is a simple process. All you need to do is press and hold the Alarm button for three seconds until you hear a beep. This will turn off the alarm and you can continue using your refrigerator as normal. If you ever need to enable the alarm again, simply press and hold the Alarm button for three seconds until you hear a beep.