If you need to access the motor on your KitchenAid model KAWS850LE1 washing machine, you can do so by first unplugging the washing machine from the power source. Then, you need to open the back panel of the washer to gain access to the motor. Once you have access to the motor, you can inspect it for any signs of damage or wear and tear. If you need to replace the motor, you can do so by removing the screws that hold it in place and disconnecting the wires that are connected to it. After that, you can install the new motor and reconnect the wires to the new motor. Finally, you can close the back panel and plug the washing machine back in.
How To Access The Motor On Kitchenaid Model Kaws850Le1 Washing Machine
The KitchenAid Model KAWS850LE1 washing machine has a motor that can be accessed by first unplugging the unit from the wall outlet. Then, remove the top panel of the machine by unscrewing the screws located at the back of the machine. Once the top panel is removed, the motor will be visible. To access the motor, unscrew the two screws located on the sides of the motor and then remove the motor from the machine. Once the motor is removed, it can be serviced or replaced.
How To Access The Motor On Kitchenaid Model Kaws850Le1 Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Remove the top panel of the washing machine by unscrewing the screws at the back of the machine.
3. Remove the front panel of the washing machine by unscrewing the screws at the back of the machine.
4. Disconnect the power cord from the motor.
5. Unscrew the motor from the mounting bracket.
6. Remove the motor from the washing machine.
7. Inspect the motor for any signs of damage or wear and tear.
8. Replace the motor if necessary.
9. Reinstall the motor and reconnect the power cord.
10. Reinstall the front and top panels of the washing machine.
11. Plug the washing machine back into the wall outlet.
In conclusion, accessing the motor on a Kitchenaid Model KAWS850LE1 washing machine is a relatively straightforward process. First, you must unplug the machine from the power source. Then, you must remove the top panel and the rear panel of the machine. Once these panels are removed, you can access the motor and perform any necessary repairs or maintenance. With a few simple steps, you can easily access the motor on a Kitchenaid Model KAWS850LE1 washing machine.