Changing a belt on an Electrolux dryer is a fairly simple process. First, you will need to locate the belt tensioner, which is usually located at the back of the dryer. Once you have located the tensioner, you will need to remove the screws that hold it in place. Once the screws are removed, you can then remove the old belt. To install the new belt, you will need to loop it around the drum and then feed it through the tensioner. Once the belt is in place, you can then reattach the tensioner and tighten the screws. Finally, you can test the dryer to make sure the belt is working properly.
How To Change A Electrolux Dryer Belt
Changing a belt on an Electrolux dryer is a relatively easy task that can be done in a few steps. First, unplug the dryer from the wall and remove the back panel. Next, locate the belt and remove it by slipping it off the motor and idler pulley. Once the old belt is removed, install the new belt by looping it around the motor and idler pulley. Finally, replace the back panel and plug the dryer back in. With these steps, you can easily replace a belt on your Electrolux dryer.
How To Change A Electrolux Dryer Belt
1. Unplug the dryer from the wall and move it away from the wall so you can access the back panel.
2. Remove the back panel of the dryer.
3. Locate the drum belt and remove it from the pulleys.
4. Replace the old belt with the new belt.
5. Reattach the belt to the pulleys.
6. Replace the back panel and plug the dryer back into the wall.
7. Test the dryer to make sure it is working properly.
Changing the belt on an Electrolux dryer is a relatively simple task that most homeowners can do themselves. It requires a few basic tools and a few minutes of your time. First, you should unplug the dryer and remove the front panel. Then, you should locate the tensioner pulley and remove the old belt. After that, you should install the new belt, making sure to align it properly with the pulley. Finally, you should reassemble the dryer and plug it back in. With a few simple steps, you can easily replace the belt on your Electrolux dryer.