Changing a heating element in an Electrolux dryer is a relatively simple process that can be completed in a few steps. Before beginning, make sure you have the necessary tools and replacement parts. You will need a Phillips head screwdriver, a pair of needle-nose pliers, and a replacement heating element. Additionally, make sure you have unplugged the dryer from the power source and that you are wearing safety glasses. Once you have all of the necessary tools and supplies, you can begin the process of replacing the heating element.
How To Change Heating Element In Electrolux Dryer
Changing the heating element in an Electrolux dryer is a relatively simple process. First, unplug the dryer and remove the back panel. Locate the heating element and disconnect the two wires connected to it. Remove the retaining screws and pull out the old heating element. Install the new heating element, reconnect the wires, and replace the back panel. Plug the dryer back in and test the new heating element. If it is working properly, the dryer should now be able to heat up and dry clothes.
How To Change Heating Element In Electrolux Dryer
1. Unplug the dryer from the wall and turn off the gas supply if applicable.
2. Remove the back panel of the dryer to access the heating element.
3. Disconnect the wires from the heating element.
4. Unscrew the mounting screws and remove the heating element.
5. Install the new heating element and reconnect the wires.
6. Re-secure the back panel and plug the dryer back in.
7. Turn on the gas supply if applicable and test the dryer.
Changing the heating element in an Electrolux dryer is not a difficult task. With the right tools and a little bit of patience, it can be done in a relatively short amount of time. The first step is to unplug the dryer and remove the back panel. Once this is done, you can locate and remove the heating element. After that, you can install the new heating element and reassemble the dryer. Finally, plug the dryer back in and test it to make sure it is working properly. With these steps, you can successfully change the heating element in an Electrolux dryer.