If you have a Kenmore washer that is making a squeaking noise when it is agitating, then you may be wondering what is causing the issue. This can be a common problem, and luckily, there are a few things you can try to fix the issue. In this article, we will discuss the possible causes of a Kenmore washer squeaking when agitating, as well as some tips for how to fix the issue.
Kenmore Washer Squeaking When Agitating
Kenmore washers are known for their durability and performance, but sometimes they can start to make a squeaking noise when agitating. This is usually caused by worn out or loose parts, such as the drive belt, the suspension rods, or the motor mounts. To fix this issue, the washer should be taken apart and the parts inspected for wear or damage. If necessary, they should be replaced with new parts. Additionally, the washer should be leveled and the suspension rods should be adjusted to ensure that the washer is properly balanced. Following these steps should help to reduce or eliminate the squeaking noise.
Kenmore Washer Squeaking When Agitating
1. Check the belt: Inspect the belt to make sure it is in good condition and not frayed or cracked.
2. Check the motor: Inspect the motor to make sure it is not making any strange noises.
3. Check the motor mount: Inspect the motor mount to make sure it is not loose or worn.
4. Check the suspension rods: Inspect the suspension rods to make sure they are not bent or broken.
5. Check the shock absorbers: Inspect the shock absorbers to make sure they are not worn or leaking.
6. Check the agitator: Inspect the agitator to make sure it is not loose or worn.
7. Lubricate the parts: If any of the parts are worn or loose, lubricate them with a lubricant designed for washing machines.
8. Replace the parts: If any of the parts are damaged or worn beyond repair, replace them with new ones.
In conclusion, the Kenmore washer squeaking when agitating can be caused by a variety of factors, including worn or damaged parts, improper installation, or a lack of lubrication. If the issue persists after troubleshooting, it is recommended to contact a qualified repair technician to diagnose and repair the issue.