If your Kenmore washer is not powering on, you may need to unlock it. This guide will show you how to unlock a Kenmore washer without power.
First, locate the lid lock switch on the washer. This is usually located on the top or side of the washer. Depending on the model, it may be a small switch or a larger button. Next, press and hold the lid lock switch for 10 seconds. This should unlock the washer and allow it to be opened. Once the washer is unlocked, you can check the power cord and make sure it is securely connected to the wall outlet. If it is not, plug it in and try powering on the washer. If the washer still does not power on, you may need to reset it. To do this, unplug the washer from the wall outlet and wait for 10 minutes.
How To Unlock A Kenmore Washer Without Power
If you have a Kenmore washer that has lost power and you need to unlock it, there are a few steps you can take. First, check the power cord to make sure it is plugged in properly. If it is, then you may need to reset the circuit breaker. If that doesn’t work, then you can try unplugging the washer for a few minutes and then plugging it back in. If that doesn’t work, then you may need to take the washer apart and manually reset the lock. To do this, you will need to locate the locking mechanism, which is usually located near the top of the washer. Once you have located it, you will need to use a flathead screwdriver to push the locking mechanism in and turn it counterclockwise. This should unlock the washer and you should be able to use it again.
How To Unlock A Kenmore Washer Without Power
1. Unplug the washer from the power source.
2. Locate the lid switch on the washer. This will be a small switch located on the inside of the washer lid.
3. Use a flathead screwdriver to carefully pry the lid switch out of its housing.
4. Insert a paperclip into the small hole in the lid switch.
5. Push the paperclip down and hold it in place. This will unlock the washer.
6. Plug the washer back in and turn it on.
In conclusion, unlocking a Kenmore washer without power can be done by manually unlocking the door latch. This can be done by inserting a flathead screwdriver into the hole located on the top of the washer door and pushing the latch to the side. It is important to remember to unplug the washer before attempting to unlock it. Additionally, if the washer is still under warranty, it is best to contact the manufacturer for assistance.