If you are having trouble getting your GE washer to finish its cleaning cycle, there are a few steps you can take to try and bypass the cycle. First, you will need to unplug the washer from the wall outlet. Then, remove the front panel of the washer and locate the timer. Check the timer for any loose or disconnected wires. If you find any, reconnect them and replace the panel. Next, press and hold the start button for five seconds. This should reset the timer and allow the washer to bypass the cleaning cycle. Finally, plug the washer back into the wall outlet and press the start button again. This should allow the washer to bypass the cleaning cycle and resume its normal operation.
How To Bypass Cleaning Cycle On Ge Washer
If you have a GE washer, you may want to know how to bypass the cleaning cycle. This can be done by pressing the Start/Pause button twice. This will start the washer without running the cleaning cycle. It is important to note that this should only be done if the washer has not been used for a long period of time, as the cleaning cycle is important for keeping the washer in good working condition. Additionally, if the washer has been used recently, it is recommended that the cleaning cycle be run to remove any dirt or debris from the machine.
How To Bypass Cleaning Cycle On Ge Washer
1. Unplug the washer from the wall outlet.
2. Press and hold the Start/Pause and the Options buttons simultaneously for three seconds.
3. Release the buttons.
4. Press the Start/Pause button once to enter the Service Mode.
5. Press the Spin Speed button to select the “No Spin” option.
6. Press the Start/Pause button again to save the setting and exit the Service Mode.
7. Plug the washer back in.
8. Select the desired cycle and start the washer.
The best way to bypass the cleaning cycle on a GE washer is to unplug the washer from the wall outlet and then press and hold the Start/Pause button for three seconds. This will reset the washer and allow you to select a new cycle. However, it is important to note that this method will not work on all GE washers, so it is important to consult the user manual for the specific model before attempting this method. Additionally, bypassing the cleaning cycle may void the warranty on the washer, so it is important to consider this before attempting this method.