If you need to drain your GE washer, it’s a relatively simple process. First, you’ll need to unplug the washer from the wall outlet. Then, locate the drain hose at the back of the washer. You can use a bucket or a container to catch the water. Next, disconnect the drain hose from the washer and place the other end of the hose into the bucket or container. Now, turn the washer on to the spin cycle and the water should begin to drain. Once the water has drained, turn off the washer and disconnect the drain hose from the bucket or container. Finally, plug the washer back into the wall outlet and you’re done!
How To Drain Ge Washer
Draining a GE washer is a fairly simple process. First, unplug the washer from the wall outlet. Then, locate the drain hose, which is typically located on the back of the washer. Place the end of the drain hose into a bucket or sink. Next, turn the dial on the washer to the “Drain and Spin” cycle. This will activate the pump, which will begin draining the water from the washer. Once the water has finished draining, turn the dial back to the “Off” position and disconnect the drain hose from the bucket or sink. Finally, plug the washer back into the wall outlet.
Popular: How To Unlock Ge Washer Top Loader
How To Drain Ge Washer
1. Unplug the washer from the wall outlet.
2. Locate the drain hose. It should be located at the back of the washer near the bottom.
3. Place a bucket or other container underneath the drain hose.
4. Disconnect the drain hose from the washer.
5. Place the other end of the drain hose into the bucket.
6. Turn on the hot and cold water valves to the washer.
7. Select the spin cycle on the washer and allow the water to drain out.
8. Once the water has finished draining, turn off the hot and cold water valves.
9. Disconnect the drain hose from the bucket and reconnect it to the washer.
10. Plug the washer back into the wall outlet.
The best way to drain a GE washer is to unplug the power cord from the wall outlet and turn off the water supply. Then, remove the drain hose from the back of the washer and place it in a bucket or sink. Finally, turn the washer to the spin cycle and allow the water to completely drain out. Once the water has drained, the washer can be plugged back in and the cycle can be restarted.