Adjusting the door swing of your Frigidaire refrigerator is a simple task that can be done in a few minutes. All you need is a Phillips head screwdriver and a few basic tools. First, locate the two screws on the top and bottom of the door. These screws are used to adjust the door swing. To adjust the door swing, loosen the screws slightly and then move the door to the desired position. Once the door is in the desired position, tighten the screws to secure the door in place. That’s all there is to it! With a few simple steps, you can easily adjust the door swing of your Frigidaire refrigerator.
How To Adjust Frigidaire Refrigerator Door Swing
Frigidaire refrigerators have adjustable door swing to accommodate different kitchen layouts. To adjust the door swing, first remove the top hinge cover and loosen the two screws on the hinge. Next, use a flathead screwdriver to loosen the two screws on the bottom hinge, and then slide the door off the hinge. Once the door is off the hinge, you can adjust the door swing by rotating the hinge pin. Finally, slide the door back onto the hinge and tighten the screws on both hinges.
How To Adjust Frigidaire Refrigerator Door Swing
1. Unplug the refrigerator from the wall outlet.
2. Remove the top hinge cover by unscrewing the two screws that hold it in place.
3. Use a Phillips head screwdriver to loosen the two screws that hold the door to the refrigerator.
4. Carefully lift the door off the refrigerator and set it aside.
5. Unscrew the bottom hinge from the refrigerator and remove it.
6. Flip the bottom hinge over so that the door will swing the opposite direction.
7. Reattach the bottom hinge to the refrigerator and tighten the screws.
8. Place the door back on the refrigerator and secure the two screws that hold it in place.
9. Replace the top hinge cover and tighten the two screws.
10. Plug the refrigerator back into the wall outlet.
The Frigidaire refrigerator door swing can be easily adjusted to suit your needs. All you need to do is locate the adjustment screws on the door hinges and loosen them. Then, you can move the door to the desired position and tighten the screws. This adjustment should be done carefully to ensure the door swings properly and does not cause any damage to the refrigerator. With a few simple steps, you can easily adjust your Frigidaire refrigerator door swing to your desired position.