Welcome to the wonderful world of ice making! Turning on your Kenmore fridge ice maker is a simple process that can be completed in a few easy steps. First, locate the ice maker switch on the inside of the refrigerator. This switch is usually located on the left side of the fridge. Once you have located the switch, turn it to the “on” position. You will hear a clicking sound as the ice maker begins to work. Next, fill the ice maker with water. This can be done by either using the water dispenser on the outside of the fridge or by filling the ice maker with a pitcher of water. Finally, wait for the ice to be made. Depending on the model of your Kenmore fridge, it can take anywhere from 30 minutes to several hours for the ice to be ready. Once the ice is ready, it will be dispensed into the ice bin located in the freezer. Enjoy your freshly made ice!
How To Turn On Ice Maker Kenmore Fridge
To turn on the ice maker in a Kenmore refrigerator, first locate the on/off switch. This switch is typically located on the front of the ice maker or inside the refrigerator, near the ice bin. Once the switch is located, turn it to the “on” position. The ice maker will then begin to produce ice. If the ice maker does not begin producing ice, check the water supply line for any kinks or blockages. If the water supply line is clear, the ice maker may need to be reset. To do this, unplug the refrigerator and plug it back in. Once the refrigerator is plugged back in, the ice maker should begin to produce ice.
How To Turn On Ice Maker Kenmore Fridge
1. Locate the On/Off switch for the ice maker. This switch is usually located on the front of the freezer door, near the top.
2. Turn the switch to the “On” position.
3. Allow the ice maker to run for approximately 24 hours before using it.
4. Check the ice maker after 24 hours to ensure it is producing ice.
5. If the ice maker is not producing ice, check the water line connection to ensure it is connected properly.
6. If the water line connection is secure, check the freezer temperature. The freezer temperature should be set to 0°F or lower for optimal ice production.
7. If the freezer temperature is set correctly and the ice maker is still not producing ice, contact a qualified service technician for assistance.
The process of turning on an ice maker in a Kenmore fridge is relatively simple. First, make sure the water supply line is connected to the water inlet valve. Then, locate the ice maker’s on/off switch and turn it to the “on” position. Finally, wait a few hours for the ice maker to begin producing ice. With these steps, you can easily turn on the ice maker in your Kenmore fridge.